///Double-Action Hydraulic Cylinders 250 bar // series HZD3
Double-Action Hydraulic Cylinders 250 bar // series HZD3 2018-03-03T14:30:07+02:00

Double-Action Hydraulic Cylinders 250 bar // series HZD3

General information

The HZD3 series cylinders are double-action pressure cylinders without end position damping that are universally applicable due to their various models and sealing variants. The piston rod guide is designed to be screwable for maintenance tasks. The piston rod consists of hightensile structural steel with an approximately 25µm hard chromium-plated layer. Other materials and coatings are available on request.

Please consult us in case of radial forces and non-vertical installation.

 

Technical data
Test pressure = 250 bar
Test pressure = 315 bar
Piston ∅ = 25 – 200 mm
Temperature range
(of the hydraulic fluid)
= -20°C to +80°C
Pressure fluid = Mineralöl (HL, HLP) nach DIN 51524 & DIN 51525 (Standard)
Stroke speed = ≤ 0,5 m/s (Standard)

Length and stroke tolerances according to DIN7168g (see “Technical Information“)

Mounting types
A Base-side ball-and-socket joint (DO – Standard) Model A
E Trunnion Model E
F Rod-side flange Model F
H Ball-and-socket joint on both sides (DO – Standard) Model H
Accessoires
A-.. Rod end (GE..DO subject to maintenance) Rod end A
B-.. Rod end (GE..HO subject to maintenance) Rod end B
G-.. Rod clevis (Tolerance field H11) Rod clevis G

Product specifications

Order key
Please click here to download the order key .

The pipe thread of the connecting bore is designed according to ISO 228/1. The position along the perimeter can be changed (Standard P7/P8).

DW-Fuehrung-250

According to the stroke length, the supporting width of the piston rod is changed to reduce the load of the guidance system when the rod is completely extended.

D1 – Groove ring and scraper made of polyurethane and a compact seal (NBR) on the piston (standard)
Temperature -30°C to +80°C
Pressure fluid Mineral oil
Stroke speed ≤ 0,5 m/s
Application Standard sealing set for normal operating conditions, very high resistance to wear
D2 – Axial seal ring set consisting of PTFE STEP SEALS (O-ring seal made of NBR), double scraper (polyurethane) and a PTFE Glyd ring (NBR O ring seal) on the piston
Temperature -30°C bis +100°C
Pressure fluid Mineral oil, flame-retardant Pressure fluids HFA and HFB up to +40°C;HFC up to +60°C
Stroke speed ≤ 1 m/s
Application Sealing set for high sliding speeds,no stick-slip effect, greater leakage than in the case of D1 and D3
D2V – Axial seal ring set consisting of PTFE STEP SEALS (O-ring seal made of Viton)
Double scraper (Viton O-ring seals) and a PTFE Glyd ring (Viton O ring seal) on the piston
Application Double scraper (Viton O-ring seals) and a PTFE Glyd ring (Viton O ring seal) on the piston Sealing set for high sliding speeds, no stick-slip effect, higher leakages than in the case of D1 and D3, on a phosphate ester (HFD) basis for higher temperatures (+200°C) and fluids
D3 – Tandem sealing set consisting of groove ring (polyurethane) and PTFE STEP SEAL and a compact seal (NBR-PTFE) on the piston
Temperature -30°C to +80°C
Pressure fluid Mineral oil
Stroke speed ≤0,8 m/s
Application Sealing set for high loads at minimum leakage,smooth-running stroke movements

Theoretical cylinder force in [kN] (efficiency = 100%)

Zylinderkraefte-DW-250

Contact
close slider

Company

Name

Phone

E-Mail*

Please call me.

Please send me information about the stock program.

Please send me the product catalog.